NEC WT615 Uživatelský manuál stáhnout pdf (Strana 15)

1. Introduction

Te r minal Panel Features

1. COMPUTER IN / Component Input Connector

(Mini D-Sub 15 Pin)

Connect your computer or other analog RGB equip-

ment such as IBM compatible or Macintosh comput-

ers. Use the supplied RGB/VGA signal cable to con-

nect to your computer. This also serves as a compo-

nent input connector that allows you to connect a com-

ponent video output of component equipment such

as a DVD player. This connector also supports SCART

output signal. See page 20 for more details.

2. COMPUTER AUDIO IN Mini Jack (Stereo Mini)

This is where you connect audio output from your com-

puter or DVD player. A commercially available audio

cable is required.

3. DVI-I IN Connector (DVI-I 29 Pin)

Connect a computer with a DVI output using a com-

mercially available DVI-D cable.

This connector can be used to accept digital and ana-

log signal output from a computer with a DVI connec-

tor.

4. DVI-I AUDIO IN Mini Jack (Stereo Mini)

This is where you connect the audio output from your

computer when connected to the DVI input. A com-

mercially available audio cable is required.

5. MONITOR OUT Connector (Mini D-Sub 15 Pin)

You can use this connector to loop your computer

image to an external monitor from the COMPUTER

or the DVI-I input source.

The RGB analog signal set on “OUT Terminal” is out-

put during Standby mode. See pages 22 and 122.

6. AUDIO OUT Mini Jack (Stereo Mini)

Connect an additional audio equipment here to listen

to audio coming from your COMPUTER, DVI-I, VIDEO

or S-VIDEO input.

7. S-VIDEO IN Connector (Mini DIN 4 Pin)

Here is where you connect the S-Video input from an

external source like a VCR.

NOTE: S-Video provides more vivid color and higher

resolution than the traditional composite video format.

8. VIDEO IN Connector (RCA)

Connect a VCR, DVD player, laser disc player, or docu-

ment camera here to project video.

9. VIDEO AUDIO IN Jacks (RCA)

L: This is your left channel audio input for stereo

sound coming from the VIDEO source.

R: This is your right channel audio input for stereo

sound from the VIDEO source.

10. REMOTE IN Jack (Mini Jack)

Connect your remote control cable here for wired op-

eration.

11. PC CONTROL Port (Mini DIN 8 Pin)

Use this port to connect your PC or control system to

control your projector via a serial cable. This enables

you to control the projector using serial communica-

tion protocol. An optional serial cable (CA03D: 9Pin

D-Sub to 8 Pin Mini DIN) is required for this port. You

can also control the projector by using PC Control

Utility 3.0 contained on the supplied User Supportware

2 CD-ROM.

To do so you must first have PC Control Utility 3.0

installed on your PC. If you are writing your own pro-

gram, typical PC control codes are on page 147.

PC CARD

AUDIO IN

/MONO

VIDEO IN

S-VIDEO IN DVI-I IN

COMPUTER IN MONITOR OUT

DVI-I COMPUTER

AUDIO IN AUDIO OUT

PCCONTROL

REMOTE

USB

1 5

12131514

3789

2410 11

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 158 159

Komentáře k této Příručce

Žádné komentáře

NEC WT615 Uživatelský manuál Strana 15

Komentáře k této Příručce

Související produkty a manuály pro Projektory NEC WT615