
CONFIGURATION GUIDE – NEC Express5800/R120d-1E
NEC Corporation Revision 4.0 – December 21, 2012 24
4.2.6 Up to six Drives with RAID 5/6 Controller with 1 GB Cache/CacheVault
Product Name / Description
Storage Controller
Required
RAID Controller (1GB, RAID 0/1/5/6)
LSI MegaRAID SAS 9265CV-8i (with CV) RAID0/1/5/6/10/50/60,
1GB Cache, Int. 8ports, PCIe 3.0(x8), 6Gb/s, flash cache
protection modules included
MegaRAID CacheCade
for LSI MegaRAID SAS
NOTE:
- SSD used for cache is required
- The SSD capacity which can be used as read cache is up to
512 GB.
Internal SAS/SATA Cable
two set of 1 x mini-SAS to 4 x Single SATA
2.5-inch Hot Plug Drive Cage Kit
6 x 2.5-inch hot plug hard drive bays
300GB HDD
1x 300 GB SAS HDD, 2.5-inch, 6Gb/s, 10,000 rpm
450GB HDD
1x 450 GB SAS HDD, 2.5-inch, 6Gb/s, 10,000 rpm
600GB HDD
1x 600 GB SAS HDD, 2.5-inch, 6Gb/s, 10,000 rpm
900GB HDD
1x 900 GB SAS HDD, 2.5-inch, 6Gb/s, 10,000 rpm
73.2GB HDD
1x 73.2 GB SAS HDD, 2.5-inch, 6Gb/s, 15,000 rpm
146.5GB HDD
1x 146.5 GB SAS HDD, 2.5-inch, 6Gb/s, 15,000 rpm
300GB HDD
1x 300 GB SAS HDD, 2.5-inch, 6Gb/s, 15,000 rpm
250GB 7.2K Hot Plug 2.5-inch SATA HDD
1x 250 GB SATA HDD, 2.5-inch, 6Gb/s, 7,200 rpm
500GB 7.2K Hot Plug 2.5-inch SATA HDD
1x 500 GB SATA HDD, 2.5-inch, 6Gb/s, 7,200 rpm
1TB 7.2K Hot Plug 2.5-inch SATA HDD
1x 1 TB SATA HDD, 2.5-inch, 6Gb/s, 7,200 rpm
100GB Hot Plug 2.5-inch SAS SSD
1x 100 GB SAS SSD, SLC, 2.5-inch, 6Gb/s
400GB Hot Plug 2.5-inch SAS SSD
1x 400 GB SAS SSD, SCL, 2.5-inch, 6Gb/s
200GB Hot Plug 2.5-inch SAS SSD
1x 200 GB SAS SSD, eMLC, 2.5-inch, 6Gb/s
400GB Hot Plug 2.5-inch SAS SSD
1x 400 GB SAS SSD, eMLC, 2.5-inch, 6Gb/s
NOTE:
All drives within a RAID array should be of the same type, capacity and rotation speed.
Up to two different kinds of drives can be mixed in one system
A large-capacity RAID array configuration requires long-time rebuilding when to recover from the
failure. In order to improve the reliability, RAID 6 or RAID 60 configuration, which supports two hard
drives failures, is recommended as the redundancy becomes invalid during the system recovery.
For VMware ESXi 5.x installation, to download the CIM provider is required.
For VMware ESXi 5.x systems, monitoring the status of a RAID array with NEC ESMPRO is not
supported.
Komentáře k této Příručce