
41
Referring to Information on RAID System
This chapter describes how to see the configurations and status of RAID Systems and the RAID System operation log.
Referring to Property of RAID Controller
For the information on a RAID Controller, see the property of the RAID Controller.
To display the property of RAID Controller by RAID Viewer,
click the RAID Controller whose information is to be seen on
the Tree View and click [Properties] on the pull-down menu
of menu item [File].
The [RAID Controller Properties] dialog box has the
[General] and [Option] tabs.
The [General] tab indicates the property of the RAID
Controller.
The [Option] tab allows you to see the settings of the RAID
Controller.
You can change the settings in the Advanced Mode.
Use "property" command to see property of a RAID
Controller by raidcmd.
-tg : Specify "rc" to see property of a RAID Controller
-c : Number of the RAID Controller
RAID Viewer
raidcmd
Number RAID Controller #X Indicates the management number (logical address) of the RAID Controller in the
Universal RAID Utility.
The Universal RAID Utility assigns a number beginning with 1 for each RAID
Controller.
ID ID Indicates the original identification value of the RAID Controller. The BIOS utility
of the RAID Controller uses the address of the identification value.
Vendor Vendor Indicates the vendor of the RAID Controller.
Model Model Indicates the model name of the RAID Controller.
Firmware Version Firmware Version Indicates the version of the RAID Controller.
Cache Size Cache Size Indicates the size of cache on RAID Controller in MB.
> raidcmd property -tg=rc -c=1
RAID Controller #1
ID : 0
Vendor : LSI Corporation
Model : MegaRAID SAS PCI Express(TM)
ROMB
Firmware Version : 1.12.02-0342
Cache Size : 128MB
Battery Status : Normal
Rebuild Priority : High
Consistency Check Priority : Low
Patrol Read : Enable
Patrol Read Priority : Low
Buzzer Setting : Enable
>
Komentáře k této Příručce