NEC Express5800/R120f-1M Uživatelský manuál stáhnout pdf (Strana 6)

fwup

[Overview]

Updates the RAID Controller firmware.

[Format]

raidcmd

fwup –c=

<controller> -f=<firmware image filepath> [-ocr={yes|no}]

Command Parameter

Description

-c=<controller>

Specify a RAID Controller you want to update.

<controller>: The RAID Controller number

-f=<firmware image filepath>

Specify an absolute path to the image file you want to update.

<firmware image filepath>: An absolute path to image file of firmware

[-ocr={yes|no}]

Specify whether a RAID Controller is reset on-line after a firmware update.

yes : Reset on-line.

no : Not reset on-line.

You can update RAID Controller firmware without rebooting a system when you

specify “yes”. If you omit to specify the –ocr parameter, “no”

is selected by

default.

[Description]

Updates firmware of the specified RAID Controller. For details, see "Updating firmware of the RAID Controller" of

"Universal RAID Utility User's Guide".

[Condition]

This command can be executed only in the Advanced Mode.

1 2 3 4 5 6 7 8 9 10 11 ... 25 26

Žádné komentáře

NEC Express5800/R120f-1M Uživatelský manuál Strana 6