NEC NP100 Uživatelský manuál stáhnout pdf (Strana 40)

English ...

Appendices

Warning: To reduce the

risk of personal injury,

do not drop the lamp

module or touch the

lamp bulb. The bulb

may shatter and cause

injury if it is dropped.

Lamp Replacing Procedure:

1. Switch off the power to the projector by pressing the Power.

2. Allow the projector to cool down at least 60 minutes.

3. Disconnect the power cable.

4. Use a screwdriver to remove the 2 screws from the cover. 

 5. Push up and remove the cover.

 6. Remove the 2 screws from the lamp module  and pull up

the lamp bar. 

7. Pull out the lamp module by force. 

8. Install the new lamp module by reversing the previous steps.

9. After replacing the lamp, turn on the power, and select the

menu ->[Reset] ->[Clear Lamp Hours] to reset the lamp usage

hours. See page 25.

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 48 49

Žádné komentáře

NEC NP100 Uživatelský manuál Strana 40